The direction of a line relative to a given meridian is known as ?
The direction of a line relative to a given meridian is known as Bearing of line
Total number of elastic constants of an isotropic material are ?
Total number of elastic constants of an isotropic material are 2
The fineness modulus of an aggregate is roughly proportional to :
The fineness modulus of an aggregate is roughly proportional to average size of particles in the aggregate
.In a singly reinforced beam, if the concrete is stressed to its allowable limit earlier than steel, the section is said to be
.In a singly reinforced beam, if the concrete is stressed to its allowable limit earlier than steel, the section is said to be
.When a load is exerted or transferred from one surface to another in contact, the stress is known as ?
.When a load is exerted or transferred from one surface to another in contact, the stress is known as bearing stress
The Soundness of cement is tested by ?
The Soundness of cement is tested by Le- Chatelier apparatus
Percentage increase to carbon in steel, decreases its ?
Percentage increase to carbon in steel, decreases its ductility
When R.C.C. footing is not to extent in the plot of the neighboring house, the type of footing preferred is
When R.C.C. footing is not to extent in the plot of the neighboring house, the type of footing preferred is strap footing
.Estimate for electrical wiring is prepared on the basis of ?
.Estimate for electrical wiring is prepared on the basis of Number of points
When compared with Chain surveying plane table is :
When compared with Chain surveying plane table is less accurate
When the plasticity index of a soil is zero, the soil is :
When the plasticity index of a soil is zero, the soil is Sand
In Brinell Hardness Test, the type of indentor used is ?
In Brinell Hardness Test, the type of indentor used is Hard steel ball
The bearing stress at bends for limit state method compared to working stress method of design
The bearing stress at bends for limit state method compared to working stress method of design is 1.5 times more
In order to determine the allowable stress in axial compression, Indian standard Institution has adopted ?
In order to determine the allowable stress in axial compression, Indian standard Institution has adopted Secant formula
Francis turbine is
The Francis turbine is a type of water turbine that was developed by James B. Francis in Lowell, Massachusetts. It is an inward-flow reaction turbine that combines radial and axial flow concepts. Francis turbines are the most common water turbine in use today.
The standard size to a masonry brick is:
The standard size to a masonry brick is 19 cm × 9 cm × 9 cm
The steel beam of light section placed in plain cement concrete are called ?
The steel beam of light section placed in plain cement concrete are called filler joists
The actual thickness of a butt weld when compared with the thickness of the plate is ?
The actual thickness of a butt weld when compared with the thickness of the plate is more
Connecting pipe in mm for septic tank should not be less than
Connecting pipe in mm for septic tank should not be less than 100mm
The Indian Standard mix design for fly ash and cement concrete recommends water content
The Indian Standard mix design for fly ash and cement concrete recommends water content to reduce by 3% to 5%
The total number of links provided in a Gunter's chain is ?
The total number of links provided in a Gunter's chain is 100
With increase in temperature the viscosity of air and water varies as ?
With increase in temperature the viscosity of air and water varies as Viscosity of air increases and viscosity of water decreases
Survey line provided to verify the accuracy of the frame work is known as
Survey line provided to verify the accuracy of the frame work is known as Check line
The specific speed of a pump is defined as the speed of a unit of such a size that it discharges
The specific speed of a pump is defined as the speed of a unit of such a size that it discharges unit discharge at unit head
White cement should have least percentage of ?
White cement should have least percentage of Iron oxide
The most desirable alignment of an irrigation canal is along ?
The most desirable alignment of an irrigation canal is along the ridge line
The process of providing smooth face and regular face to stones is known as :
The process of providing smooth face and regular face to stones is known as dressing
The number of standard bricks in one cubic meter of brick masonry is
The number of standard bricks in one cubic meter of brick masonry is 500
Pollution potential of domestic sewage generated in a town and its industrial sewage can be compared with reference to ?
Pollution potential of domestic sewage generated in a town and its industrial sewage can be compared with reference to population equivalent
Which of the following is a relatively ductile material ?
Which of the following is a relatively ductile material
A beam is supported over three rollers lying in the same plane. The beam is stable for ?
A beam is supported over three rollers lying in the same plane. The beam is stable for Loading with no component in the direction of the beam
The fillet weld whose axis is parallel to the direction of the applied load is known as ?
The fillet weld whose axis is parallel to the direction of the applied load is known as side fillet weld
One cubic metre of mild steel weighs about ?
One cubic metre of mild steel weighs about 7850 kg
The dimensions of Chezy's C is ?
The dimensions of Chezy's C is [L/T2]1/2
.When two points of surveying are mutually invisible the following method of ranging is adopted ?
When two points of surveying are mutually invisible the Indirect ranging method of ranging is adopted